
Always make sure you have your brakes checked regularly, at least twice a year, by a specialist expert. Your safety can depend on it. Here are a few tips to possibly help diagnose a problem.
Our mechanics have been specializing in brakes and clutches for over 20 years.
These are just a few common problems that can occur,
Caliper Pistons seized (check shoe springs)
Handbrake requires adjustment (check cable)
Check hydraulics
Brake drums need adjustment
Disc run out
Incorrect or glazed linings
Seized Caliper Pistons
Master Cylinder fault
Check Cable
Check Adjustment
Rear Brakes worn or faulty
Check fluid contamination or overhaul
Retaining pins worn or shoes or pads incorrectly fitted
Warped or worn discs or oval drums
Air in system needs bleeding
Check linings and Master Cylinder
Not releasing correctly, check clutch master cylinder for air or leakage
Seized or leaking master or slave cyinder
Check hoses
Clutch is worn when taking off or going uphill the engine is revving with no speed increase
Oil leak from gearbox or engines on to the clutch lining
Check for broken engine mounts
Check clutch plate and thrust bearing
Machine fly wheel
Check clutch cable
A noise squeal or grinding when the clutch pedal is depressed could mean a problem with the release bearing
Hard to get 1st gear or reverse check master cylinder and slave cylinder
We hope information has been helpful to you.
QuickStop Brake and Clutch are stockists of Disc Brake Australia & Bendix Brake Parts. For more information visit there website below.
Disc Brakes Australia
Bendix Brake Parts
If you have a problem with your brakes or clutch, why not let us check it for you? We do FREE BRAKE AND CLUTCH CHECKS.
Call us to book a time at your convenience.
1/3 Abrams Street
Balcatta
Western Australia 6021
Phone (08) 9345 4722



